Menu

SPECIAL APPLICATIONS

For certain products like IBC containers, Bag In Box containers or standard drums, tracing can also be used to keep the liquid inside free of frost or at a certain temperature.  For those special applications, DIRAC TraceHeat has developed a wide range of prefabricated products, ready to use.

PCS

  • To maintain the temperature of the tanks containing components during the manufacturing or polymerisation process.
    Suitable for temperature up to 60ºC

PCS

PCA- F128

  • Aluminium heating mat PCA for single use
  • Reinforced to carry the IBC’s weight
  • Finished with aluminium from all sides(top, sides & bottom)

PCA-F128

PCA- F116

  • Aluminium heating mat PCA for single use
  • Finished with aluminium on top & sides.
  • Overall Dimensions:1000 x 1000 mm.

PCA-F116

KRLA

  • For temperature maintenance or heating of tanks, oil sumps, metal plates etc. installed under insulation
  • Held in place using eyelets (KRL) or self-adhesive..

KRLA

PCM

  • For heating tanks, road or rail tankers, containers, hoppers, reactors, etc…
  • Mineral insulated cable, with cupro nickel or stainless steel sheath, mounted on a perforated stainless steel panel

PCM

CFB

  • For standard 200 litres (45 gallons) drums
  • Resistance tape sandwiched between mica sheets protected by an internal aluminium plated steel jacket, and by an external bright stainless..

CFB

CFR

  • For standard 200 litre (45 gallon) drums
  • PTFE insulated resistance wire sandwiched between layers of silicone covered glass fabric to obtain a double insulated construction

CFR

ECF

  • For all sizes of drums up to 45 gallon (200 litres)
  • 2mm thick strengthened mild steel base including a mat heater and 50mm high-density rock wool
  • High-temperature coating

ECF

HCC

  • For PLASTIC or METAL drums
  • A water-resistant polyurethane nylon jacket covering the heating element and then insulated by woven polyester
  • Quick release buckles…

HCC

CCC

  • Designed for METAL drums only
  • Heating elements embedded into a jacket made from glass impregnated silicone and insulated by a woven mat of silica-glass
  • Fitted with a 20-200°C..

CCC

HIF

  • For continuous temperature control after filling with a hot liquid, or after heating with our drum heaters CFB / CFR / HCC / or CCC
  • Can be used with our base drum heater ECF (to reduce the heat-up time)

HIF

CFI

  • Only for MILD STEEL drums
  • ATEX II 2 G+D – Ex e II 170C (T3) certified for hazardous areas
  • Very low and evenly distributed watt density (0.1W/cm2) ideal for heat sensitive products

CFI

ECI

  • For steel, stainless steel, or plastic drums
  • ATEX II 2 G+D – Ex e II T3 certified
  • Steel plate mounted on the induction base, encapsuled in glass reinforced resin

ECI

HCSR

  • For steel, stainless steel, or plastic drums
  • ATEX II 2 G – Ex e II T3 (150°C) certified
  • Patented technology using self-regulating heating membranes under…

HCSR

HIBCS

  • Heating jacket for freeze or congealing protection on fluids stored in 1000 litres containers *
  • Silicone rubber insulated heating resistance, inserted between a water resistant polyester…

HIBCS

HIBCB

  • Heating jacket with 2 independant zones (upper and lower halves) for heating or temperature maintenance of fluids stored in 1000 litres containers *
  • Heating resistance…

HIBCB

HIB-EX

  • Heating jacket for temperature maintenance up to 55°C of fluids stored in 1000 litres containers * in azardous areas
  • ATEX II 2 G – Ex e II T3 (150°C) certified

HIB-EX